How does one restore communication between a wireless router and modem? - webstar cable modem linksys setup
More precisely, between a wireless router Linksys WRT54G v. 5 model and Webstar DPC2100 Series cable modem. My problem began today, when does my internet wirelessly anymore. Currently, it works quite well when wired through my modem. Any attempt, the modem router to the output indicator on the PC to connect modem and open the Internet LED on the router and close, without rest. When I try to connect to my router when the Ethernet cable is connected between two devices, simply connect to my wireless router, not the possibilities of the Internet connection. My ISP is obviously good, as the modem. The router was power for his bike more often lately, but I think it still is functional. Please can someone explain howTo solve this problem?
Webstar Cable Modem Linksys Setup How Does One Restore Communication Between A Wireless Router And Modem?
2 comments:
Have you tried to power the modem router? Disconnect both, wait a minute before using the modem, router.
Restart the router with the reset button on the back. Then go to the configuration of the router probably 192.168.0.1) (and make sure the settings are good, DHCP and DNS is configured correctly.
I want to try first, the router. There is a reset button on the back. Unplug the power cord, hold the reset button for 10 seconds, and close while holding the power button for 10 seconds or less. Try again. (Note - This will remove the security settings for wireless radio connection, you should save all through the router manual.)
If that does not help ... You said that you have a link to go directly from the modem to get the computer can? If it does not work then your router is probably failed. The good news is that they are much cheaper than they were.
Post a Comment